Strip Light

COB and SMD white strips, RGBW (colour + white) and tunable white — in IP20 (indoor), IP65/IP66 and IP67 (damp/outdoor) ratings, on 12V and 24V.

COB (chip-on-board, 480 chips/m) gives continuous, dot-free light — ideal for visible coves and profiles; SMD (2835) is a high-efficiency discrete-LED strip for general and decorative runs. We supply both.

Yes — COB IP67 for outdoor and landscape lines, SMD IP65/IP66 (silicone-sleeved) for humid and semi-outdoor areas like bathrooms and kitchens, plus IP20 for dry interiors.

From 4.8 W/m up to 19 W/m depending on type, with outputs up to about 1500 lm/m, and CRI >80 or >90 (Ra90 on COB) for accurate colour.

Yes — RGBW combines full colour with a dedicated white channel, and our tunable white strip adjusts from warm 2700K to cool 6500K for adaptive lighting.

3000K, 4000K and 6000K, with tunable white available; RGBW adds dynamic colour.

Yes — strips cut at marked intervals (25-50 mm) and ship on 5 m reels; maximum continuous run is 5 m at 12V / 10 m at 24V, with parallel wiring for longer runs.

Constant-voltage DC drivers (12V/24V), plus aluminium profiles, opal diffusers, end caps, clips and connectors. Strips are dimmable via compatible controls, with dedicated RGBW and tunable-white controllers.

Yes — we hold strip stock in Dubai and supply cut-to-project lengths with the right profile, IP rating and colour temperature for your application.

Detailed datasheets per strip type, and up to five years warranty.

Contact us with your project details for a tailored quotation.