Recessed
TECHNICAL SPECIFICATIONS
| Parameter | Value |
|---|---|
| Model base | NILL2 |
| Mounting | Recessed with trim |
| Section | Rectangular |
| Height | 35 mm |
| Width | Made to order, 50-300 mm - width drives power and output |
| Bendable | side-bend |
| Finish | Silver |
| Power | table |
| Parameter | Value |
|---|---|
| Diffuser | Opal PMMA |
| Beam angle | 120° |
| IP rating | IP20 |
| CRI | ≥80/90 |
| CCT | 3000 K / 4000 K / 6500 K |
| Input voltage | 220-240 V AC |
| Driver | Tridonic . TCI . Philips |
| Control | On/Off . 1-10 V . 0-10 V . DALI . Phase-cut |
| Efficiency | Up to ~170 lm/W from the light source |
| Body | aluminium |
| Warranty | 5 years |
| Lifetime | 50,000h |
Description
The recessed-with-trim Nile sets the light line flush into the ceiling with a visible trim flange framing the aperture. The body recesses above the ceiling while the flange covers the cut edge — no trimless plastering required. Like every Nile, it is a side-bend system: straight runs, curves and serpentine layouts are made to order, with the width configured per project.
